TNKMF-01A Muffle Furnace
Keywords:
TNKMF-01A Muffle Furnace
Category:
Hotline:
TNKMF-01A Muffle Furnace
Product Introduction
TNKMF-01A muffle furnace is designed and manufactured by Luoyang Turner High Temperature Instrument. It has a compact appearance and can be placed in a fume hood or on a laboratory bench. It takes up limited space and has a reasonable structural design. It uses silicon carbon rods as heating elements. It uses high-grade refractory materials in the furnace, which is heat-insulating and energy-saving. It uses S-type platinum-rhodium thermocouple with diameter of 0.5mm as a temperature measuring element. A corrosive gas exhaust channel is configured behind the furnace to discharge the generated corrosive gas in time.
Product Features
1. The heating elements use high-quality silicon carbon rods. Resistance wires are not used. Resistance wires have a short life, will deform after long-term use, and replacement is cumbersome. Silicon carbon rods are made of silicon carbide and have strong corrosion resistance.
2. Multi-layer insulation materials have the characteristics of good insulation and less heat absorption, which plays a role in energy saving and consumption reduction.
3. The wide working temperature range allows equipment can be widely used in steel, alloys, chemicals, geology, cement, ceramics, refractory materials and other industries.
4. An S-type platinum-rhodium thermocouple with diameter of 0.5mm is used as the temperature measuring element, which allows accurate temperature measurement and long service life.
5. There is a corrosion-resistant panel at the bottom of the furnace chamber to prevent the chamber bottom from sample splashing and corrosion.
6. A corrosive gas exhaust channel is configured behind the furnace to discharge the generated corrosive gas in time.
Technical Parameters
Furnace Chamber Dimensions | 200mm×180mm×300mm （Width × Height × Depth） |
Rated Temperature | 1200℃（1300℃ Allowed For Short Period Of Time） |
Heating Rate | 40℃/min |
Heating Element | Silicon Carbide Rod |
Furnace Chamber Material | High-grade Refractory Materials |
Temperature Control Accuracy | ±1℃ |
Door Open Mode | Side Opening |
Control Mode | Intelligent Three-phase Temperature Controller |
Temperature Measuring Element | Platinum-rhodium S-type Thermocouple |
Equipment Dimensions | 600 ×630mm ×800mm （Width ×Depth ×Height） |
Exhaust Pipe Size | 48mm Diameter Stainless Steel |
Inquiry Message
We will contact you within one working day. Please pay attention to your email.
Scan
Luoyang Turner High Temperature Instrument Co., Ltd.
+86-400-880-7095
Sales (same as WeChat):18695992058
Contact:+86-379-69755886
Address: South Section of Shuangxiang Road, Luoxin Industrial Cluster, Luoyang City, Henan Province
Email:tnkinstrument@163.com
Copyright © Luoyang Tainake High-Temperature Instrument Equipment Co., Ltd. IPV6